Teamspeak servers now offer you the option to change the codec of individual channels. “Why would I want to change the codec and what is it exactly?” you migh ask. Well, there are many reasons, but here’s some information that might help you decide for yourself whether this is something that youw ould need to do. The following codec run-down comes direct from Teamspeak’s Official FAQ:

“Quality: (best quality comes first)

Modem
Speex 9.3 is still quite good quality. Limit your download to 10 KBit. Note that if you want to game its way to high a setting, go as low as you can bare (Speex 5.2, or even Speex 3.4, limit your download to 6 respectivly 4).”

Given this information, I am sure that you may have already thought of one or two reasons for adjusting your codec. The next step, if you decide that you do need to alter the codec of a given channel, is to make the change. Only administrators of a server will be able to make such a change.

1. Right click on the channel that you wish to change the codec for.

2. Select “Edit channel” from the menu that appears.

3. Choose the desired codec from the drop-down menu.

4. Click “apply”.

…and you are done! You don’t need to restart the server or anything so it makes rather easy to test the differences between various codecs.

One important thing to remember when setting the channel codec is that the computers of some of your players may not process the codec that you prefer the same way that your computer does. Be sure to ask your players to let you know if they have any issues anytime that you change the codec so that you can adjust it accordingly.

That’s pretty much all you need to know on the subject. Don’t worry about messing up your server since you can always set the codec back. Go ahead, get out there, and give a few different codecs a whirl on your Teamspeak server!

Tags: Teamspeak Server, Teamspeak Servers

Ventrilo Servers are great, but the users on them can sometimes pose a problem. Luckily Ventrilo has several features that help keep such issues to a minimum.

Case in point, have you ever had someone login to your Ventrilo Server and have their microphone volume up so high that it? Well, this is something that you can remedy without having to be an admin on the Ventrilo server. You can actually raise or lower the volume of anyone in the server as you see fit! How do you do this, you ask? Well, Let me show you.

1. Right-click on a person’s name within your Ventrilo client then goto “Miscellaneous” and click on “Special Effect”

2. A new window will pop up with a list of special effect on the right. Highlight “Volume” on the right.

3. Click the “Add” button in the middle of the window.

4. A menu will pop up asking you to adjust the volume to your desired level. Simply drag the slider to the setting you wish then click “Ok”

5. Click “Ok” again to close out of the special effects window and your changes have been applied.

This setting will only affect how you here the people which you have modified. Other people in Ventrilo will still hear them normally. Like wise you can go back into the special effects menu and go into the properties of the “Volume” effect and adjust their volume again at anytime or remove it entirely.

This little tactic comes in handy for people who won’t reduce their microphone volume or are just having too much trouble figuring out how to change it on their home computer. I can vouch from personal experience that this has saved me from a lot of stress on many occasion. I hope it is just as useful for you!

Tags: ventrilo, Ventrilo Server, Ventrilo Servers

When creating a clan, guild, or other group of individuals that require the use of a voice server for communication, a major question that you need to ask yourself is what type of voice server should I pick? Currently your primary choices will be between a Ventrilo Server or a Teamspeak Server (though individuals who like to stay on the latest edge of gaming software may also opt for Mumble Servers if you don’t mind dealing with newer software that still has a few kink to be worked out).

In this article we will set Mumble aside for now as it won’t be a real contender until they release they release the v2.0 of their software (which should be coming soon!). Instead we will be dealing with the two most popular choices: Ventrilo and Teamspeak.

So what are the main differences between Teamspeak Server Hosting and Ventrilo Server Hosting you ask? Well, without getting into specifics, I’ll lay out their major points below:

Teamspeak Hosting:
- Voice quality is not the greatest, but it is pretty good and often alot better than the voice service that is built-in to many games, such as Counter-Strike: Source or World of Warcraft.

- Easy to use for both it’s clients and it’s administrators.

- Easy to configure for it’s administrators. Administrative options are very basic for Teamspeak with minimal computer experience to operate and configure.

Ventrilo Hosting:
- Voice quality is very clean and clear.

- Moderately simple to use for it’s clients, but administrating a Ventrilo server requires quite a bit more fiddling and a moderate amount of computer experience to use.

- Configuring a Ventrilo Server is a bit more difficult than Teamspeak, but the voice quality is often worth it to many individuals. Luckily it has a good learning curve, so once you take the time to play with all of Ventrilo’s various administrative features, it’s pretty easy from there on out.

Aside from these major points, both Teamspeak Servers and Ventrilo Servers are relatively the same. Both require very little computer power to run and don’t require a fast internet speed to operate properly. Both are also fairly small and easy to install.

This information should help you pick the right brand voice service for you and your fellow members’ needs if you are having trouble making a decision. Also, it never hurts to ask your members if they have a preference of voice software. With all of this mind, if you still find yourself having trouble making a decision, then that’s when it’s time to flip a coin, as at that point either decision you make is going to be a good one.

Below are some common tasks that you will need to know using Mumble servers.

Read the rest of this entry »

Having a hard time with Mumble servers? These are some common tasks that you may need to preform with your mumble server.

Logging in as the server’s SuperUser:
If you want full admin access to the server then you need to login with the username “SuperUser” and the password that you have set in the superadmin.txt file (which is located in the Default Config Files section of your server’s web control panel). The login is case-sensitive so make sure that you capitalize both the letters S and U in the username SuperUser when logging in. The SuperUser account is currently the only one with access to create channels, kick, ban, etc. Also, note that the SuperUser account cannot speak. If you wish to be able to speak then you need to login under a different username.

Setting a global password on the server:
Edit the murmur.ini file (which is located in the Default Config Files section of your server’s web control panel) and place the desired password at the end of the”serverpassword=” entry. Save the file and restart your server for the change to take effect.

Adding an administrator or other users:
This functionality has not yet been implemented, but is slated for the v1.2.0 releases of the Murmur & Mumble voice chat software (which hopefully will be fairly soon). You can see a list of all the functions that are to be added in the upcoming version by visiting their “Upcoming Features” page at the link below:

http://mumble.sourceforge.net/Upcoming

Mumble servers are becoming very popular, but users are still getting the hang of how to use them. Here is a set of simple instructions on how to connect to your Mumble voice server!

When you first open the Mumble voice client you will see a window labeled “Mumble Server Connect”. Click on the “Custom Servers” tab at the top of this window and click on the button labeled “New”. You will than want to fill in the following blanks:

Label - This is simply a name for this server entry on your home computer. The label can be anything you like, such as “Bob’s Server” and has no effect on how you connect.

Address - This is the server’s IP address (or hostname if it has one).

Port - This is the port number of the server that you are wanting to connect to.

Username - This is the name that will be visible to others when you login to the voice server. This can be anything that you want. The only restriction being that it is not a username that is already in use by someone else on the server.

Password - This is the password used to login to the server. By default you will simply leave this blank. If the voice server admin created a global password that you need to login to their server then you will type that password in here.

You will then want to click on the “Add” button at the bottom of the window once all the above information has been filled in. This will add this entry to your Custom Servers list so that you can connect to it at anytime simply by selecting it on the left and then clicking on the “Connect” button at the bottom of the window. You will now connect to your Mumble server.

How to create working channels on your Ventrilo server.

Channels help separate the individuals on your server into different areas of your server so that multiple people can have their own separate conversations going on within the same Ventrilo server without interrupting one another.

Read the rest of this entry »

There are two methods of doing this. One is to simply have the user kicked from the server so they are no longer using up one of your server slots and the other is to have them moved to a specific channel so that they are out of the way and everyone else knows that they are AFK. To setup AFK management on your server follow these simle steps below:

Read the rest of this entry »